Products | glass construction

Your Link to us

Imprint

architekten24.de

bauinfo24.at

digital nervous systems

Keyword

Projects

News

Planners

Speciality firms

Products

Services

Suppliers

Publications

Up-to-date information about interesting projects and important events. This letter is free of charge and is without obligations. Your details will be treated as confidential! subscribe newsletter

Laminated glass facade thanks to DuPont™ SentryGlas® interlayer

Thinner, lighter and safer laminated glass facade for Portuguese office building thanks to DuPont™ SentryGlas® interlayer

Stevenage, July 2010. The street-facing facade of a newly-built office building belonging to Bouygues Imobiliária in Lisbon, Portugal, is formed by laminated glass panels made with strong and stiff DuPont™ SentryGlas® interlayer. The ability of SentryGlas® to create highly-resilient laminates with excellent post-breakage performance has allowed the facade engineering specialist Facal, of Santo Tirso (Portugal), to create a comparatively thinner, lighter glazing that is able to cost-effectively meet building and safety requirements and requires comparatively small point fixtures to hold the panels securely in place.

The facade (left-hand side of shot) over
the entrance of a newly-built office
building belonging to Bouygues Imo-
biliária in Lisbon, Portugal, is formed
by laminated glass panels made with
strong and stiff DuPont™ SentryGlas®
interlayers.

Facal, a company recognized nationally and internationally for its pursuit of technical innovation in facade engineering, developed and installed the laminated glass facade for the Explorer building at the Parque das Nações in Lisbon. Measuring 20 meters high and 10 meters wide, the facade consists of approximately 40 laminated glass panels produced by the glazing specialists Vicer of Maia, Portugal. According to initial calculations, a laminate construction using a standard polyvinyl butyral (PVB) interlayer would require the two glass sheets to be each 12 mm thick in order to provide the required long-term resistance to the specified wind loads. Moreover, it would require a comparatively expensive supporting framework with very large fixtures would be required to withstand the weight of the panes and the additional wind forces.

The ability of DuPont™ SentryGlas® to
create highly-resilient laminates with
excellent post-breakage performance has
allowed the facade engineering specialist
Facal to create a comparatively thinner,
lighter facade, requiring a less obtrusive
fixing system.

However, because SentryGlas® interlayers are five times stronger and approximately 100 times stiffer than PVB, a thinner glass construction can be used to achieve the same load-bearing capacity of the PVB alternative. For Facal this meant that, by using a laminate construction consisting of 10 mm strengthened glass + 1.52 mm SentryGlas® + 8mm tempered glass, they were able to reduce the thickness and the weight of the panels by 25 percent. This in turn meant that the point fixing system developed by Facal to hold the panels securely in place could be made smaller, and therefore less obtrusive, than those required for the equivalent glass laminated glass panels made with a PVB interlayer. These combined benefits also result in a more cost-effective glazing solution with regard to the facade's production and installation.

The excellent post-breakage behavior of laminated safety glass made with SentryGlas® was a further critical safety factor in the selection of the DuPont interlayer for the Portuguese facade, as a spokesperson at Facal explains: "Our primary concern was that of providing increased safety and ongoing protection in case of glass breakage and fallout. This is of particular significance in Lisbon, a city susceptible to seismic movements. With some of the glass panels as high as 20 meters above street level, it is essential that the integrity of the glass facade is retained and there is no risk of fragments of glass falling on to passers-by. Thanks to its excellent post-breakage performance, and the fact that the glass fragments remain adhered to the interlayer, this is assured with SentryGlas®." Further benefits of SentryGlas® interlayer include its high, crystal-clear transparency, its virtually universal resistance to yellowing and excellent edge stability.

DuPont Glass Laminating Solutions provides materials, services and innovations to makers and specifiers of laminated glass. It helps create a better world by improving home protection and automotive safety, and enabling design of stronger, more energy-efficient buildings that let in more natural light.

DuPont is a science-based products and services company. Founded in 1802, DuPont puts science to work by creating sustainable solutions essential to a better, safer, healthier life for people everywhere. Operating in more than 70 countries, DuPont offers a wide range of innovative products and services for markets including agriculture and food; building and construction; communications; and transportation.

The DuPont Oval, DuPont™ and SentryGlas® are registered trademarks or trademarks of E. I. du Pont de Nemours and Company or its affiliates.

More information
DuPont de Nemours (Deutschland) GmbH
Hugenottenallee 173 - 175, D-63263 Neu-Isenburg
Editorial Contact:
Birgit Radlinger • Tel.: +49 (0) 61 02/18-2638 • birgit.radlinger@dupont.com
Andrew Wilkins • Tel.: +44 (0) 1353 663350 • dupont.press@btconnect.com

Print view

Send article